Menu

IAP-120

IAP-120

Industrial IEEE 802.11b/g Wireless Access Point

Download Brochure Order Enquiry

IAP-120 series are reliable IEEE802.11b/g WLAN Access Point with 2 ports LAN. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-120 series by WEB interface via LAN port or WLAN interface. IAP-120 series provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IAP-120 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-120 series are one of the best communication solutions for wireless applications on the industrial network.

Features

  • High Speed Air Connectivity : WLAN interface support up to 54Mbps link speed
  • Support X-Roaming < 100 ms
  • Support wireless load balance
  • Highly Security Capability : WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Support AP/Bridge/Repeater/AP-Client /Client Mode
  • Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
  • Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
  • Secured Management by HTTPS
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Model IAP-120 IAP-120+
Lan
Ethernet Ports 2 x 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
PoE P.D. Port - Present at ETH2
Fully compliant with IEEE 802.3af Power Device specification
Over load and short circuit protection

Isolation Voltage: 1000VDC min. Isolation Resistance: 108ohms min
WLan
Operating Mode AP
Bridge
Repeater
AP-Client
Client
Antenna and Connector 2dBi antenna on reverse SMA connector
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 Ghz (13 channels)
Transmission Rate IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power IEEE802.11b/g : 20dBm Max
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP: (64-bit ,128-bit key supported)
WPA/WPA2: IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security SSID broadcast disable
Protocol Support
Protocol ARP
BOOTP
DHCP
DNS
HTTPs
IP
ICMP
SNTP
TCP
UDP
RADIUS
SNMP
STP (IEEE 802.1D)
LED Indicators
Power Indicator PWR 1(2) (PoE) / Ready
Red On: Power is on and booting up
Green On: Power is on and functioning Normally
10/100Base-T(X) RJ45 Port Indicator Green: Link/Act at 100Mbps
Amber: Link/Act at 10Mbps.
WLAN LEDs WLAN Link /ACT: Green
Green LED(s) for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
Fault Red: Ethernet link down or power down
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs
12~48VDC on 6-pin terminal block
Triple DC inputs
48VDC from PoE
Dual 12~48VDC on 6-pin terminal block
Power Consumption (Typ.) 6 watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical & Environmental
Enclosure IP-30
Dimensions 54.2mm x 106.1mm x 145.4mm
Weight 800 g 804 g
Storage Temperature -40 to 85°C
Operating Temperature -10 to 70°C
Operating Humidity 5% to 95% Non-condensing
EMI FCC Part 15
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours)
(MIL-HDBK-217F2, GB, GC, 25°C )
352,982 352,594
Warranty 3 years

IAP-120 / IAP-120+ Dimensions