Menu

M-7060P / M-7060PD

M-7060P / M-7060PD

4-channel Isolated Digital Input with 16-bit Counters
4-channel Relay Output
Modbus Protocol support
LED Display (optional)

Order Enquiry

Digital Input
Channels 4
Contact Wet
Type Sink or Source
Off Voltage Level +4 VDC Max.
On Voltage Level +10 ~ 50 VDC
Input Impedance 10 k Ohm
Counters Channels: 4
Max. Counts: 16-bit (65535)
Max. Input Frequency: 100Hz
Min. Pulse Width: 5ms
Overvoltage Protection +/-70 VDC
Relay Output
Channels 4
Relay Type Power Relay
2x Form A
2x Form C
Contact rating Form A: 16A @250 VAC; 10A @30 VDC
Form C: 10A(NO)/6A(NC) @250 VAC
Operating Time(typical) 6ms
Release Time(typical) 3ms
Surge Strength 2500 VDC
Mechanical Endurance 107 ops.
Electrical Endurance 5 × 104 ops.
Power-on Value Yes
Safe Value Yes
Isolation
Intra-Module Isolation,
Field-to-Logic
3750 Vrms
EMS Protection
ESD (IEC 61000-4-2) +/-4 kV
EFT (IEC 61000-4-4) +/-4 kV
Surge (IEC 61000-4-5) +/- 3 kV
Interface
Interface RS-485
Format N, 8, 1
N, 8, 2
E, 8, 1
O, 8, 1
Baud Rate 1200~115200 bps
Protocol Modbus
Dual Watchdog Yes
Module (1.6 Seconds)
Communication (Programmable)
LED Indicators
LED Display 1 LED as Power/ Communication indicator
4 LEDs as Digital Input indicators (M-7060PD only)
4 LEDs as Relay Output indicators (M-7060PD only)
Power
Input Voltage Range +10 ~ +30 VDC
Power Consumption 1.4W
Reverse Polarity Protection Yes
Physical and Environmental
Operating temperature -25 to 75°C
Storage temperature -40 to 75°C
Humidity 5 to 95%, non-condensing