Menu

IDS-5042

IDS-5042

Industrial 4-port Secure Serial to Ethernet Device Server
4x RS-232/422/485
2x 10/100Base-T(X)

Download Brochure Order Enquiry

IDS-5042 series is an innovative secure 4-port RS-232/422/485 to 2 ports LAN secure device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042 series can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042 series features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-5042 series supports RS-232/422/485 and provides dual redundant power inputs 12~48 VDC on terminal block to guarantee a non-stop operation. Further, IDS-5042+ features PoE P.D. (Power Device) function with 1kv isolation on the PoE port. With wide operating temperature, -10~70°C, and rugged IP-30 housing design, IDS-5042 series could operate in the harsh industrial environment. Therefore, IDS-5042 series is the best solution to the high demand of secure serial to Ethernet critical data communication.

Features

  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices :
    • 5 host devices : Virtual COM, TCP Server, TCP Client mode
    • 4 IP ranges : UDP
  • NAT Pass-Through: the user can manage IDS-5042/5042+ through NAT router
  • Security : SSL data encryption
    secured management by HTTPS and SSH IP Access : IP White List
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
  • Ethernet switch mode enable Daisy Chain
  • Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported : Windows NT/2000/XP/2003/VISTA/Windows 7
  • 1KV isolation for PoE P.D. port of IDS-5042+

Model IDS-5042 IDS-5042+
Lan
Ethernet Ports 2x 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
PoE Feature - PoE P.D. Present at ETH2
Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface
Power consumption: 8Watts max.
Over load and short circuit protection
Isolation Voltage:
1000 VDC min.
Isolation Resistance: 108 ohms min
Serial
Connector DB9(male) x 4
Operation Mode RS-232 / RS-422 / RS-485. configured by DS-Tool / web interface
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF
RTS/CTS
DTR/DSR
Network Features
Network Protocols ICMP
IP
TCP
UDP
DHCP
BOOTP
SSH
DNS
SNMP V1/V2c
HTTPS
SMTP
SSL
PPPoE
DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready
Red On: Power is on and booting up
Red Blinking: IP conflict, DHCP/BOOTP server did not respond
Green On: Power is on and functioning Normally
Green Blinking: Located by Administrator
100Base-FX with SC Connector Green: Link/Act at 100Mbps
Serial TX / RX LEDs Red: Serial port is receiving data
Green: Serial port is transmitting data
Fault Indicator Red: Indicate unexpected events occurred
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual 12~48VDC on 6-pin terminal block Triple DC inputs
48VDC from PoE, Dual 12~48VDC on 6-pin terminal block
Power Consumption (Typ.) 5.5 watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical & Environmental
Enclosure IP-30
Dimensions 52mm x 106.1mm x 144.3mm
Weight 678 g 682 g
Storage Temperature -40 to 85°C
Operating Temperature -10 to 70°C
Operating Humidity 5% to 95% Non-condensing
EMI FCC Part 15
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours)
(MIL-HDBK-217F2, GB, GC, 25°C )
569,972
Warranty 5 years

IDS-5042 Dimensions