Menu

IDS-5012

IDS-5012

Industrial 1-port Secure Serial to Ethernet Device Server
1x RS-232/422/485
2x 10/100Base-T(X)

Download Brochure Order Enquiry

IDS-5012 is an innovative secure 1-port RS-232/422/485 to 2 port LAN serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5012 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5012 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-5012 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a nonstop operation. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-5012 could operate in the harsh industrial environment. Therefore, IDS-5012 is the best solution to the high demand of secure serial to Ethernet critical data communication.

Features

  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices :
    • 5 host devices : Virtual COM, TCP Server, TCP Client mode
    • 4 IP ranges : UDP
  • NAT Pass-Through : the user can manage IDS-5012 through NAT router
  • Security : SSL data encryption
    secured management by HTTPS and SSH IP Access : IP White List
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
  • Ethernet switch mode enable Daisy Chain
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)

LAN
Ethernet Ports 2 x 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
Serial
Connector DB9(male) x 1
Operation Mode RS-232 / RS-422 / RS-485 can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485 (4-wire) Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire) Data+, Data-, GND
Flow Control XON/XOFF
RTS/CTS
DTR/DSR
Network Features
Network Protocols ICMP
IP
TCP
UDP
DHCP
BOOTP
SSH
DNS
SNMP V1/V2c
HTTPS
SMTP
SSL
PPPoE
DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready:
Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On: Power is on and functioning Normally.
Green Blinking: Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green: Link/Act at 100Mbps.
Amber: Link/Act at 10Mbps.
Serial TX / RX LEDs Red: Serial port is receiving data
Green: Serial port is transmitting data
Power
Redundant Input Power Dual DC inputs
12 ~ 48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 4 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical and Environmental
Enclosure IP-30
Dimensions 72mm x 29.4mm x 123.4mm
Weight 327g
Storage Temperature -40 to 85°C
Operating Temperature -40 to 70°C
Operating Humidity 5% to 95% Non-condensing
EMI FCC Part 15
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours)
(MIL-HDBK-217F2, GB, GC, 25°C)
533,615
Warranty 5 years

IDS-5012 Dimensions