Menu

IDS-5011-WG

IDS-5011-WG

Industrial 1-port Secure Serial to IEEE 802.11 b/g Wireless Device Server
1x RS-232/422/485
1x 10/100Base-T(X)

Download Brochure Order Enquiry

IDS-5011-WG is an innovative secure 1-port RS232/422/485 to 802.11b/g WLAN, up to 54Mbps, and 1-port LAN device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5011-WG can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5011-WG features HTTPS, SSH, SSL encryption, and 802.1X to assure the security of critical data transmission.

IDS-5011-WG supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide operating temperature, -10~65°C, and rugged IP-30 housing design, IDS-5011-WG could operate in the harsh industrial environment. Therefore, IDS-5011-WG is the best solution to the high demand of secure serial to WLAN critical data communication.

Features

  • High Speed Air Connectivity : WLAN interface support up to 54Mbps link speed
  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices :
              5 host devices : Virtual COM, TCP Server, TCP Client mode
              4 IP ranges : UDP
  • NAT Pass-Through : the user can manage IDS-5011-WG through NAT router
  • High Security Capability :
              SSL data encryption
              Secured management by HTTPS and SSH
              IP Access : IP White List
              Wireless : WEP/WPA/PA2/802.1X/TKIP
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)

LAN
Ethernet Ports 1 x 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
WLAN
WLAN Standard IEEE802.11b/g
Operating Mode Client mode
Antenna and Connector 2dBi antenna on reversed SMA connector
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
Transmission Rate IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power IEEE802.11b/g: 16dBm
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP: (64-bit ,128-bit key supported)
WPA / WPA2: IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
TKIP encryption
802.1X Authentication supported
Serial
Connector DB9(male) x 1
Operation Mode RS-232 / RS-422 / RS-485 can be configured by DS-Tool
Serial Baud Rate 110 bps to 230.4 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485 (4-wire) Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire) Data+, Data-, GND
Flow Control XON/XOFF
RTS/CTS
DTR/DSR
Network Features
Network Protocols ICMP
IP
TCP
UDP
DHCP
BOOTP
SSH
DNS
SNMP V1/V2c
HTTPS
SMTP
SSL
PPPoE
DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready:
     Red On: Power is on and booting up.
     Red Blinking: IP conflict, or DHCP/BOOTP server did not respond.
     Green On: Power is on and functioning Normally.
     Green Blinking: Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps.
WLAN Indicator Green for WLAN Link /ACT
Serial TX / RX LEDs Red: Serial port is receiving data
Green: Serial port is transmitting data
Power
Redundant Input Power Dual DC inputs
12 ~ 48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 5 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical and Environmental
Enclosure IP-30
Dimensions 72mm x 29.4mm x 123.4mm
Weight 346g
Storage Temperature -40 to 85°C
Operating Temperature -10 to 65°C
Operating Humidity 5% to 95% Non-condensing
EMI FCC Part 15
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years

IDS-5011-WG Dimensions