IDS-5011 is an innovative secure 1-port RS-232 to 1-port LAN serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5011 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5011 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-5011 provides dual redundant power inputs, 12~48 VDC and DC power jack to guarantee a non-stop operation. With wide operating temperature, -40°~70°C , and rugged IP-30 housing design, IDS-5011 could operate in the harsh industrial environment. Therefore IDS-5011 is the best solution to the high demand of secure serial to Ethernet critical data communication.
|Ethernet Ports||1 x 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX|
|Connector||DB9(male) x 1|
|Serial Baud Rate||110 bps to 460.8 Kbps|
|Data Bits||5, 6, 7, 8|
|Parity||odd, even, none, mark, space|
|Stop Bits||1, 1.5, 2|
|RS-232||TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND|
|Power Indicator||PWR 1(2) / Ready:
Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On: Power is on and functioning Normally.
Green Blinking: Located by Administrator.
|10/100Base-T(X) RJ45 Port Indicator||Green: Link/Act at 100Mbps.
Amber: Link/Act at 10Mbps.
|Serial TX / RX LEDs||Red: Serial port is receiving data
Green: Serial port is transmitting data
|Redundant Input Power||Dual DC inputs
12 ~ 48VDC on 3-pin terminal block and power jack
|Power Consumption (Typ.)||4 watts|
|Overload Current Protection||Present|
|Reverse Polarity Protection||Present on terminal block|
|Physical and Environmental|
|Dimensions||72mm x 29.4mm x 123.4mm|
|Storage Temperature||-40 to 85°C|
|Operating Temperature||-40 to 70°C|
|Operating Humidity||5% to 95% Non-condensing|
|EMI||FCC Part 15
CISPR (EN55022) class A